DIGICOM SPA

TINTORETTO LAN

Card Type                    ISDN LAN
Chip Set                     Unidentified
I/O Options                  Power, RJ-45 connectors (4)
ISDN Rate                    128Kbps
Maximum Fax Rate             14.4Kbps

ISDN Modulation Protocol     V.110, V.120, PPP, MLPPP
Error Correction/Compression V.42bis
Fax Class                    Class I
Data Bus                     External

[Image]

                                CONNECTIONS

        Function          Label             Function              Label

  DC power                     CN1       HUB LAN port (RJ-45       CN4
                                         connector)

  Configuration port           CN2       ISDN interface (RJ-45     CN5
  (RJ-45 connector)                      connector)

  PC LAN port (RJ-45           CN3
  connector)

                             DIAGNOSTIC LED(S)

   LED        Color        Status                  Condition

   PWR        Green          On          Power is on and diagnostic test
                                                has been passed

   PWR        Green       Blinking       Power is on. Device is in BOOT
                                           mode and is flashing EPROM

   PWR         Red           On            Power is on. Device failed
                                                diagnostic test

   PWR       Yellow          On        Device is loading firmware in RAM

   PWR       Yellow       Blinking           Device is in BOOT mode

   PWR         N/A           Off                  Power is off

   LAN        Green          On         LAN is connected and forwarding

   LAN         Red           On             LAN connection is broken

   LAN       Yellow          On             LAN is connected but not
                                                  forwarding.

    B1        Green          On        ISDN B1 channel is active; in data
                                                      mode

    B1       Yellow          On        ISDN B1 channel is active, but not
                                                compressing data

    B1         Red           On           ISDN B1 channel connection is
                                               being established

    B1         N/A           Off          ISDN B1 channel is inactive

    B2        Green          On        ISDN B2 channel is active; in data
                                                      mode

    B2       Yellow          On        ISDN B2 channel is active, but not
                                                compressing data

    B2         Red           On           ISDN B2 channel connection is
                                               being established

    B2         N/A           Off          ISDN B2 channel is inactive



                   SUPPORTED COMMAND SET

                     Basic AT Commands

  AT, A/

  E, Q, V, W

  &C, &R, &Z

                        S Registers

  S3, S4, S12, S25, S26



  Note: See MHI Help File for full command documentation.

                         PROPRIETARY AT COMMAND SET

      For a full command summary, see DIGICOM SPA TINTORETTO EXTERNAL